RIIMPO323E – Conduct civil construction dozer operations.
This unit describes the skills and knowledge required to conduct dozer operations.This unit applies to those working in site-based roles.Licensing, legislative, regulatory and certification requirements that apply to this unit can vary between states, territories, and industry sectors, and must be sourced from state jurisdictions prior to applying this unit.
This unit alone does not provide sufficient skill to independently load and unload equipment. To perform this activity safely, personnel must either complete or be assisting someone who has completed RIIHAN308F Load and unload plant or equivalent.
On completion of this course participants will have the skills and knowledge to:
- Select and wear personal protective equipment required for work activities.
- Identify, obtain and implement traffic management signage requirements.
- Select required dozer tools, equipment and/or attachments and confirm suitability for work activities.
- Coordinate and communicate planned activities with others at the site prior to commencement of work activity.
- Carry out prestart and start-up checks in line with workplace procedures.
- Identify faults or defects and rectify or report within scope of own responsibility and according to workplace procedures.
- Drive and operate dozer using techniques suited to equipment capabilities, site and work conditions, and according to workplace procedures.
- Monitor hazards and risks during operations, and ensure safety of self, other personnel, plant and equipment.
- Perform work activity within the operating capacity of the equipment.
- Park up, shut down, secure and carry out post operational inspection of equipment in line with workplace procedures.
- Select, fit and test attachment for the task.
- Use attachment within design limits and in accordance with workplace procedures.
- Remove, clean and store attachments in designated location in line with workplace procedures.
- Prepare dozer for relocation.
- Move dozer safely between worksites, observing relevant codes and traffic management requirements.
- Assist loading and unloading of machine from float/trailer as required by workplace procedures.
- Conduct housekeeping activities.
Cost: $600
Duration: 1-3 days depending on experience
We are conducting courses in and around the following suburbs.
Melton, Rockbank, Sunbury, Sunshine, Bacchus Marsh, Melbourne.
Let us help you get started in the Civil Construction industry.
For enquiries please call 0404 554 535 or email: enquiries@procon.edu.au
